Genuss
2000 Multipart Carbon Paper Collating and Interleaving System
for One-time Carbon Paper and Carbonless Papers.
This
multipart crimper-collator is popular for its simplicity of
operation, rugged construction and minimal maintenance. Designed
for a wide variety of continuous stationery, it is easy to
set up and operate. |
|
Genuss 2000 Multipart Collator
collates :
- Upto four part sets interleaved
with carbon or seven parts using carbonless paper.
- Multipart sets in a variety
of widths and lengths with quick and easy adjustment for any change.
- Multipart sets with carbon
paper already affixed to each part by adhesive.
- Sprocket-punched forms
5`` upto 18`` width.
Salient Features
of the Plant :
-
Precision
crimping provides crimp-holds which are correctly tenacious
for good operating conditions on data processing equipment yet
separate as required after the EDP print run is over.
-
The
entire loading, setting, adjustment and operations of the machine
is simple, easy and fast and even an unskilled operator can
rapidly achieve proficiency and high productivity.
-
The
pin wheel assembly design is far superior to conventional design
and the crimping knives have compound cutting angles and are
manufactured to very close tolerances for longer life. The geometry
of the crimp knives ensures long blade life.
-
The
crimping unit is designed for high-speed, accurately repeating
crimping with 4 tongue crimp-holds specially formed to provide
feeding tenacity. It permits quick release when required.
-
The
unit has an electronic revolution counter.
-
The
unit is covered by a 12 month standard warranty for all mechanical
and electrical parts.
Technical Specifications
of Unit :
| Maximum Parts
with carbon : 4 parts |
| Maximum Parts
with Carbonless Paper : 7 parts |
| Inter Crimp-lock
distance : 2`` |
| Maximum Paper Width
: 18`` |
| Minimum Paper
Width : 5`` |
| Maximum Running
Speed : 15,000 FPH |
| Maximum Paper
Speed : 250 FPM |
| Single Phase
Electric Power : 220 V, 1 Phase, 15 Amp |
| Machine Dimensions
(w x l x h) : 1.2m x 2.0m x 1.1m |
| Minimum Operating
Space required : 2.2m x 2.5m x 2.0m |
| Weight of
Unit : 350 kgs |
|
| Plate
Exposing Unit: The
Web Offset Plate Exposing and developing system is equipped
with 1000 watt mercury vapor lamp and vacuum chamber for the
plate unit, which assure high quality of reproductivity. The
power requirement for this unit is 220 V, single phase power
supply. |
|
| Plate
Baking Unit: The
Plate Baking Unit for baking pre-sensitized offset plates
to increase the plate run-life by approximately 250%. This
is a special baking chamber wherein the plates are baked under
controlled temperatures to harden the image area of the plate.
Plates once baked, become tempered and cannot be scratched,
reducing the wear and tear, reducing the changeover time,
and increasing the shelf life of plates for reruns. This unit
requires 220 V, 15 Amps, 1 phase power supply. |
|
Click
here to downloading the brochure in pdf format |
